Zachodniopomorski Uniwersytet Technologiczny w Szczecinie

Administracja Centralna Uczelni - Wymiana międzynarodowa (S1)

Sylabus przedmiotu Metallic Materials:

Informacje podstawowe

Kierunek studiów Wymiana międzynarodowa
Forma studiów studia stacjonarne Poziom pierwszego stopnia
Tytuł zawodowy absolwenta
Obszary studiów
Profil
Moduł
Przedmiot Metallic Materials
Specjalność przedmiot wspólny
Jednostka prowadząca Instytut Inżynierii Materiałowej
Nauczyciel odpowiedzialny Walenty Jasiński <Walenty.Jasinski@zut.edu.pl>
Inni nauczyciele Walenty Jasiński <Walenty.Jasinski@zut.edu.pl>
ECTS (planowane) 5,0 ECTS (formy) 5,0
Forma zaliczenia zaliczenie Język angielski
Blok obieralny Grupa obieralna

Formy dydaktyczne

Forma dydaktycznaKODSemestrGodzinyECTSWagaZaliczenie
wykładyW2 30 3,00,60zaliczenie
laboratoriaL2 30 2,00,40zaliczenie

Wymagania wstępne

KODWymaganie wstępne
W-1Fundamentals of materials science. Basic knowledge of the chemical composition, structure of the materials and physicochemical transformation
W-2Fundamentals of mechanics and strength of materials
W-3Computer techniques knowledge

Cele przedmiotu

KODCel modułu/przedmiotu
C-1To familiarize students with the history of the development of metal materials
C-2To acquaint students with the influence of the chemical composition and technological of state on the microstructure and properties of metallic materials
C-3To familiarize students with the methods of the testing of the properties of metallic materials
C-4To acquaint students with methods of molding properties of metallic materials by heat treatment methods

Treści programowe z podziałem na formy zajęć

KODTreść programowaGodziny
laboratoria
T-L-1The influence of the carbon content and the cooling rate after austenitization the properties of the steel2
T-L-2Effect of austenitizing temperature on hardness of steel after hardening2
T-L-3Effect of austenitizing time on hardness of the steel after hardening2
T-L-4The influence of the cooling medium on the properties of the steel2
T-L-5The effect of alloying elements on the hardenability of the steel2
T-L-6The effect of tempering temperature on the properties of the steel2
T-L-7The susceptibility of temper unalloyed and alloyed steels2
T-L-8Heat treatment of carbon tool steels2
T-L-9Heat treatment of high speedtool steels2
T-L-10The deformation strengthening of aluminium alloys2
T-L-11The preciipitation strengthening of aluminium alloys2
T-L-12The deformation strengthening of cooper alloys2
T-L-13The precipitation strengthening of cooper alloys2
T-L-14Microscopic analysis of the microstructure of steel and cast alloys2
T-L-15Microscopic analysis of non-ferrous alloys2
30
wykłady
T-W-1The history of development of materials and their clasification1
T-W-2Solutions and Iron-Carbon Phase Diagram2
T-W-3The Microstructure of Carbon Steel at Room Temperature2
T-W-4The Mechanical Properties of the Steel2
T-W-5The Microstructure and Properties of the Low-Alloy Steels2
T-W-6Diffusion - A Mechanism for Atom Migration within a Metal2
T-W-7Austenitization2
T-W-8Control of Grain Size by Heat Treatment and Forging2
T-W-9Hardenability of Steel2
T-W-10Tempering2
T-W-11Quenching2
T-W-12Stainless Steel3
T-W-13Tool Steels2
T-W-14Copper Alloys2
T-W-15Aluminum Alloys2
30

Obciążenie pracą studenta - formy aktywności

KODForma aktywnościGodziny
laboratoria
A-L-1Participation in the laboratory exercises30
A-L-2Preparation of reports on laboratory exercises26
A-L-3Consutations4
60
wykłady
A-W-1Participation in lectures30
A-W-2Deepening news analysis indicated literature15
A-W-3Preparing to pass the course10
A-W-4Consultation3
A-W-5Exam2
60

Metody nauczania / narzędzia dydaktyczne

KODMetoda nauczania / narzędzie dydaktyczne
M-1informative lecture
M-2laboratory assessment of the influence of carbon and alloying elements and parameters of austenitization on the properties of the metallic materials

Sposoby oceny

KODSposób oceny
S-1Ocena formująca: Rating messages acquired during lectures and self-study in the field of metallic materials based on the writing exam
S-2Ocena formująca: Rating messages based on reports from the laboratorium

Zamierzone efekty kształcenia - wiedza

Zamierzone efekty kształceniaOdniesienie do efektów kształcenia dla kierunku studiówOdniesienie do efektów zdefiniowanych dla obszaru kształceniaCel przedmiotuTreści programoweMetody nauczaniaSposób oceny
WM-WIMiM_1-_null_W01
As a result of studies, the student should know the basic types of metallic materials, dependence on the microstructure and properties as a function of chemical composition. The methods of forming and evaluating properties of metallic materials
C-1, C-2, C-3, C-4M-1, M-2S-1, S-2

Zamierzone efekty kształcenia - umiejętności

Zamierzone efekty kształceniaOdniesienie do efektów kształcenia dla kierunku studiówOdniesienie do efektów zdefiniowanych dla obszaru kształceniaCel przedmiotuTreści programoweMetody nauczaniaSposób oceny
WM-WIMiM_1-_null_U01
Students should be able to choose and shape properties of a metallic material for a specific application. Students should be able to assess the properties of materials in various of technological states
C-1, C-2, C-3, C-4M-1, M-2S-1, S-2

Zamierzone efekty kształcenia - inne kompetencje społeczne i personalne

Zamierzone efekty kształceniaOdniesienie do efektów kształcenia dla kierunku studiówOdniesienie do efektów zdefiniowanych dla obszaru kształceniaCel przedmiotuTreści programoweMetody nauczaniaSposób oceny
WM-WIMiM_1-_null_K01
The result of the student's participation in the classes is shaping student attitudes necessary to work effectively in a team.
C-3, C-4T-L-1, T-L-2, T-L-4, T-L-5, T-L-6, T-L-9, T-L-11, T-L-13, T-L-14M-1, M-2S-1, S-2

Kryterium oceny - inne kompetencje społeczne i personalne

Efekt kształceniaOcenaKryterium oceny
WM-WIMiM_1-_null_K01
The result of the student's participation in the classes is shaping student attitudes necessary to work effectively in a team.
2,0Students not mastered basic issues related to the metallic materials
3,0The student knows the basic issues related to the metallic materials, and can classify basic metallic materials
3,5The student knows the basic issues related to the metallic materials, can classify and determine the parameters of heat treatment of construction and machine steels
4,0The student knows the issues related to the metallic materials, treatments can be classified according to the heat treatment and destination and specify the parameters of heat treatment of construction, machine and tool steels
4,5
5,0

Literatura podstawowa

  1. George E. Totten, Rating messages based on reports from the laboratorium, WSP, Warszawa, 1993
  2. Dieter G.E., Mechanical Metallurgy, International Structural Edition, John Willey, Mertals Handbook, 1981
  3. Mitchel E. Bever, Encyclopedia of Materials Science and Enginering, Pergamon Press

Treści programowe - laboratoria

KODTreść programowaGodziny
T-L-1The influence of the carbon content and the cooling rate after austenitization the properties of the steel2
T-L-2Effect of austenitizing temperature on hardness of steel after hardening2
T-L-3Effect of austenitizing time on hardness of the steel after hardening2
T-L-4The influence of the cooling medium on the properties of the steel2
T-L-5The effect of alloying elements on the hardenability of the steel2
T-L-6The effect of tempering temperature on the properties of the steel2
T-L-7The susceptibility of temper unalloyed and alloyed steels2
T-L-8Heat treatment of carbon tool steels2
T-L-9Heat treatment of high speedtool steels2
T-L-10The deformation strengthening of aluminium alloys2
T-L-11The preciipitation strengthening of aluminium alloys2
T-L-12The deformation strengthening of cooper alloys2
T-L-13The precipitation strengthening of cooper alloys2
T-L-14Microscopic analysis of the microstructure of steel and cast alloys2
T-L-15Microscopic analysis of non-ferrous alloys2
30

Treści programowe - wykłady

KODTreść programowaGodziny
T-W-1The history of development of materials and their clasification1
T-W-2Solutions and Iron-Carbon Phase Diagram2
T-W-3The Microstructure of Carbon Steel at Room Temperature2
T-W-4The Mechanical Properties of the Steel2
T-W-5The Microstructure and Properties of the Low-Alloy Steels2
T-W-6Diffusion - A Mechanism for Atom Migration within a Metal2
T-W-7Austenitization2
T-W-8Control of Grain Size by Heat Treatment and Forging2
T-W-9Hardenability of Steel2
T-W-10Tempering2
T-W-11Quenching2
T-W-12Stainless Steel3
T-W-13Tool Steels2
T-W-14Copper Alloys2
T-W-15Aluminum Alloys2
30

Formy aktywności - laboratoria

KODForma aktywnościGodziny
A-L-1Participation in the laboratory exercises30
A-L-2Preparation of reports on laboratory exercises26
A-L-3Consutations4
60
(*) 1 punkt ECTS, odpowiada około 30 godzinom aktywności studenta

Formy aktywności - wykłady

KODForma aktywnościGodziny
A-W-1Participation in lectures30
A-W-2Deepening news analysis indicated literature15
A-W-3Preparing to pass the course10
A-W-4Consultation3
A-W-5Exam2
60
(*) 1 punkt ECTS, odpowiada około 30 godzinom aktywności studenta
PoleKODZnaczenie kodu
Zamierzone efekty kształceniaWM-WIMiM_1-_null_W01As a result of studies, the student should know the basic types of metallic materials, dependence on the microstructure and properties as a function of chemical composition. The methods of forming and evaluating properties of metallic materials
Cel przedmiotuC-1To familiarize students with the history of the development of metal materials
C-2To acquaint students with the influence of the chemical composition and technological of state on the microstructure and properties of metallic materials
C-3To familiarize students with the methods of the testing of the properties of metallic materials
C-4To acquaint students with methods of molding properties of metallic materials by heat treatment methods
Metody nauczaniaM-1informative lecture
M-2laboratory assessment of the influence of carbon and alloying elements and parameters of austenitization on the properties of the metallic materials
Sposób ocenyS-1Ocena formująca: Rating messages acquired during lectures and self-study in the field of metallic materials based on the writing exam
S-2Ocena formująca: Rating messages based on reports from the laboratorium
PoleKODZnaczenie kodu
Zamierzone efekty kształceniaWM-WIMiM_1-_null_U01Students should be able to choose and shape properties of a metallic material for a specific application. Students should be able to assess the properties of materials in various of technological states
Cel przedmiotuC-1To familiarize students with the history of the development of metal materials
C-2To acquaint students with the influence of the chemical composition and technological of state on the microstructure and properties of metallic materials
C-3To familiarize students with the methods of the testing of the properties of metallic materials
C-4To acquaint students with methods of molding properties of metallic materials by heat treatment methods
Metody nauczaniaM-1informative lecture
M-2laboratory assessment of the influence of carbon and alloying elements and parameters of austenitization on the properties of the metallic materials
Sposób ocenyS-1Ocena formująca: Rating messages acquired during lectures and self-study in the field of metallic materials based on the writing exam
S-2Ocena formująca: Rating messages based on reports from the laboratorium
PoleKODZnaczenie kodu
Zamierzone efekty kształceniaWM-WIMiM_1-_null_K01The result of the student's participation in the classes is shaping student attitudes necessary to work effectively in a team.
Cel przedmiotuC-3To familiarize students with the methods of the testing of the properties of metallic materials
C-4To acquaint students with methods of molding properties of metallic materials by heat treatment methods
Treści programoweT-L-1The influence of the carbon content and the cooling rate after austenitization the properties of the steel
T-L-2Effect of austenitizing temperature on hardness of steel after hardening
T-L-4The influence of the cooling medium on the properties of the steel
T-L-5The effect of alloying elements on the hardenability of the steel
T-L-6The effect of tempering temperature on the properties of the steel
T-L-9Heat treatment of high speedtool steels
T-L-11The preciipitation strengthening of aluminium alloys
T-L-13The precipitation strengthening of cooper alloys
T-L-14Microscopic analysis of the microstructure of steel and cast alloys
Metody nauczaniaM-1informative lecture
M-2laboratory assessment of the influence of carbon and alloying elements and parameters of austenitization on the properties of the metallic materials
Sposób ocenyS-1Ocena formująca: Rating messages acquired during lectures and self-study in the field of metallic materials based on the writing exam
S-2Ocena formująca: Rating messages based on reports from the laboratorium
Kryteria ocenyOcenaKryterium oceny
2,0Students not mastered basic issues related to the metallic materials
3,0The student knows the basic issues related to the metallic materials, and can classify basic metallic materials
3,5The student knows the basic issues related to the metallic materials, can classify and determine the parameters of heat treatment of construction and machine steels
4,0The student knows the issues related to the metallic materials, treatments can be classified according to the heat treatment and destination and specify the parameters of heat treatment of construction, machine and tool steels
4,5
5,0